San Diego, CA August 13, 2024 – Cal Am Manufacturing is announcing a four (4) NEW JackMoon® Fiber Optic Simplex plugs. Now available in four smaller sizes: 0.70” | 19mm, 0.75” | 20mm (2 sizes) & 0.90” | 23mm.
Fiber Optic Simplex Plug | Duct Plugs | Cal Am Manufacturing
Fiber optic simplex plugs are essential to any fiber optic network. They ensure that fiber optic cables are properly terminated and protected. They are a signature part of the Cal Am system: a fully comprehensive datacenter solution for sealing conduit, microduct, innerduct, and fiber optic cable. Whether building a new network or upgrading an existing one, the complete Cal Am system is the answer.
WHO NEEDS IT: Now more common in datacenters, electrical, and telecom projects, contractors and engineers have a high demand for these NEW smaller Fiber Optic Simplex plugs.
WHAT IS IT: Smaller fiber optic simplex plug to secure smaller sizes of fiber optic cable in innerduct
SPECIFICATIONS:
- 7106-008-035 0.70″ | 19mm
- Conduit Inner Diameter Range 0.74″ – 0.82″ | 18.80mm – 20.83mm
- Port Diameter Range 0.08″ – 0.35″ | 2.03mm – 8.89mm
- Applicable 0.75″ | 20mm Conduit:
- HDPE SDR 9
- Case Quantity: 20 pieces
- Exact cross for JM-SIM-06S035SB – previously unavailable
- 7107-008-020 0.75″ | 20mm
- Conduit Inner Diameter Range 0.78″ – 0.86″ | 19.81mm – 21.84mm
- Port Diameter Range 0.08″ – 0.20″ | 2.03mm – 5.08mm
- Applicable 0.75″ | 20mm Conduit:
- PVC SCH 40
- HDPE SDR 11
- EMT
- Case Quantity: 20 pieces
- 7107-020-035 0.75″ | 20mm
- Conduit Inner Diameter Range 0.78″ – 0.86″ | 19.81mm – 21.84mm
- Port Diameter Range 0.20″ – 0.35″ | 5.08mm – 8.89mm
- Applicable 0.75″ | 20mm Conduit:
- PVC SCH 40
- HDPE SDR 11
- EMT
- Case Quantity: 20 pieces
- Exact cross for JM-SIM-07S035SB – previously unavailable
- 7109-033-051 0.90″ | 23mm
- Conduit Inner Diameter 0.92″ – 1.06″ | 23.37mm – 26.92mm
- Port Diameter Range 0.33″ – 0.51″ | 8.38mm – 12.95mm
- Applicable 1.00″ | 25mm Conduit:
- PVC SCH 40
- HDPE SCH 40
- HDPE SDR 9
- EMT
- Case Quantity: 20 pieces
- Exact cross for JM-SIM-09S050SB – previously unavailable
FEATURES |
Thermoplastic Elastomer Seal: When the gasket is expanded, it creates a tight seal that makes it air and water-resistant to protect the investment. |
| Split Design: The split design of the plug is retrofit installable, meaning there is always time to install it after a project is completed to protect the investment. | |
| Non-metallic materials: Constructed from non-metallic materials and, therefore, corrosion-resistant, making the seal long-lasting and cost-effective for any project. |
